Howe Group launched the OMX14x series chipIssuing time:2023-11-25 13:21
With the advent of intelligent driving and intelligent cockpit technology, MCU, as the main component of various electronic control unit ECU, is widely used in ADAS, body, chassis and safety, infotainment, power system and so on. MCU chip consumption accounts for about 30% of the total number of automotive semiconductor devices, different types of vehicles for vehicle level MCU demand is very large, the average amount of traditional cars to reach more than 70, and the amount of smart cars is expected to increase exponentially. According to the authority forecast, the number of MCUS carried by new energy vehicles is more than three times the number of MCUS in traditional fuel vehicles, with the increase in the penetration rate of smart cars, each smart car in new energy vehicles is expected to use more than 300 MCUS. After the OMX14x series was released in July this year, Howe Group can now provide a sample of the production version of the chip for customers to test. At present, several Tier 1 projects have been tested and used. OMX14x Family
The OMX14x series is divided into two sub-series, OMX14xN and OMX14xB. The specific configurations are as follows: OMX14xN Detailed configuration: -Core and Memory Arm®Cortex®-M4F@ 120 MHz Up to 1MB Flash with ECC (A/B bank OTA support) 128KB data Flash with ECC and EEPROM emulation Up to 128KB SRAM with ECC -Digital interface 4x CAN-FD, 3x LIN/UART, 3x SPI, 2x I2C 8-pin SMTIO Up to 128 GPIOs -Analog and Timers 2x 12bit ADC with programmable trigger 1x Analog comparator with 8bit DAC 6x 16bit advanced timer (ADVTMR) with 8chs (IC/OC/PWM) 1x 16bit always-on timer (AOTMR) 1x 32bit general purpose timer(GPTMR) 2x analog timer(ANATMR) with flexible trigger system 1x real time counter(RTC) 1x temperature sensor -Security/Fu-Sa AutoSAR SHE(HSM Light) ASIL-B -Temp. Range: Ta -40 to 105℃ (Tj=125°C) -Power Supplies: 2.7-3.6V -Package: LQFP64,100,144
OMX14xB Detailed configuration: -Core and Memory Arm®Cortex®-M4F@ 120 MHz Up to 2MB Flash with ECC 128KB data Flash with ECC and EEPROM emulation Up to 128KB SRAM with ECC 32KB Retention SRAM -Digital interface 6x CAN-FD, 6x LIN/UART, 6x SPI, 2x I2C, 1x QSPI 8-pin SMTIO Up to 156GPIOs -Analog and Timers 2x 12bit ADC with programmable trigger 1x Analog comparator w/ 8bit DAC 8x 16bit advanced timer (ADVTMR) with 8chs (IC/OC/PWM) 1x 16bit always-on timer (AOTMR) 1x 32bit general purpose timer(GPTMR) 2x analog timer(ANATMR) with flexible trigger system 1x real time counter(RTC) 1x temperature sensor -Security/Fu-Sa AutoSAR SHE(HSM Light) ASIL-B -Temp. Range: Ta -40 to 105℃ (Tj=125°C) -Power Supplies: 2.9-5.5V -Package: LQFP100, 144, 176
Key benefits of OMX14x series Domestic supply chain vehicle gauge MCU OMX14x series OMX14xN is a domestic supply chain vehicle MCU. From Fab to sealed test all for domestic manufacturers. At the same time, thanks to the synergistic advantages of Haowei Group's multi-product lines in the supply chain, in addition to the cost-effective product, it can provide a safe and stable supply. IP self-developed, optimized Howe has a research and development team with nearly 20 years of experience in vehicle regulation product development. OMX14x series in addition to ARM core and eFlash, all IP self-developed, self-developed advantages in addition to eliminating IP licensing costs, more importantly, can be optimized for important IP combined with real user scenarios. For example, CAN-FD interface IP, multiple CAN interfaces share 10KB RAM, optimized each CAN module can be configured with up to 128 standard frame filters, up to 64 extended frame filters, up to 32 TX buffers /FIFO, up to 64 RX buffers, RX FIFO0 receives a maximum of 64 frames, and RX FIFO1 receives a maximum of 64 frames. Users can freely allocate the number of sending units, receiving units and filter filters according to the actual use of RAM space within the scope allowed, and use more flexible. Sufficient receiving units ensure that even if the bus is under high load, it can still receive enough to ensure that no messages are lost. Howe CAN-FD IP has passed the third party ISO16845-1 based conformance test and CAN provide test reports and stress test reports. CAN FD Buffer comparison:
CAN FD Third party conformance test report:
Reduce customer verification migration costs The OMX14x series is fully compatible with the actual products used by customers, and the original PCB can be used directly when the system is verified. No need to re-layout the board. The OMX14x family supports Keil, Eclipse, IAR and other major ides. Software migration provides an independent code generation Tool Auto Generator Tool, graphical configuration of GPIO, Clock and peripherals to improve migration efficiency. At the same time, MCAL is free for customers to use. |
![]() |