TDK presents a sample kit of the ERU 33 series compact high-current inductorsIssuing time:2023-11-25 13:19
DK Corporation has recently launched the B82559A*A033 series of shielded EPCOS ERU 33 high current inductors sample kit. The sample kit covers six standard models in the range (two samples for each model). In addition to the standard models included in the sample kit, it is possible to customize samples for other inductor types with other inductance values.
These through-hole elements are designed for ultra-high saturation currents, ranging from 32A to 83A in the =100°C current range, inductance values from 3.2 µH to 10 µH, and DC resistance as low as 0.85 mΩ or 1.2mΩ, depending on the model. It has a flat wire winding and a very compact size of only 33 x 33 x 15 mm. By connecting a flat coil to an electrically insulated core, the inductor can also be connected to a heat sink to improve heat dissipation. All inductors are RoHS compliant and AEC-Q200 REV D certified with a wide operating temperature from -40°C to +150°C for a wide range of applications. Typical automotive applications include lift/step-down chokes in DC-DC converters (such as differential mode chokes used in 48V on-board power supplies or on-board charger input filters). In the field of industrial electronics, these components can be used for energy storage and output chokes in high-current power supply to point of load (PoL) conversion. Features and applications Main application Up-buck DC-DC converter in 48V on-board power supply Energy storage and output chokes in high-current power supply Main features and advantages High saturation current: up to 83 A Low DC resistance: as low as 0.85 mΩ Ultra-compact size: only 33 x 33 x 15 mm The heat sink can be directly connected for efficient heat dissipation |
![]() |